Parkside electric chipper/shredder

15 Amp high-torque turbo motor for efficient throughput
ideal for chipping and shredding leaves, twigs, brush and branches up to 1.7″ thick
two premium hardened steel blades – double-sided reversible design
constant power control for consistently high throughput under any load
overload protection automatically shuts off the motor when the shredder/chipper gets clogged and prevents automatic restarts, also after a power outage
protected power switch
removable 11.9 gal collection bag
electronically controlled soft start
features a handle and smooth-running wheels for enhanced portability
lightweight design for easy handling and transport
includes paddle for pushing material into the feeding funnel
power: 15A
no-load speed: 3900 rpm
max. branch thickness: 1.7”
collection bag capacity: 11.9 gal.
3-year limited warranty

Parkside 40V cordless chainsaw

high-efficiency brushless motor
up to 30% longer lifespan compared to conventional motors
maintenance free
two adjustable chain speeds
metal gearbox
soft start technology for smooth start-ups
OREGON guide bar with bearing-mounted drive sprocket
smooth-running, low-vibration OREGON chrome chain
double-activated chain brake for increased safety: immediately engages (< 0.12 sec.) when front hand pushes against guard lever or when trigger switch is released
automatic oiler keeps the bar and chain lubricated
oil level window and tethered oil cap
tool-free chain tensioning system
metal spiked bumper
top handle allows you to perform angled cuts in comfort
charge level indicator on the tool
chain and guide bar system: OREGON brand
chain speed: 1st gear: 49’/s / 2nd gear: 69’/s
bar length: 16”
3-year limited warranty

Parkside battery pack dual rapid charger

charges two battery packs at once – even with different capacities
auto shut-off and three-segment charge indicator
also suitable for wall mounting
rated power consumption: 200W
max. charging current: 2 x 4.5A
charging time (20V / 4 Ah): 60 min
length of power cable: 6.5″
3-year limited warranty

Parkside power tool battery charger 20V

auto shut-off and LED charge indicator
rated power consumption: 65W
charging current: 2.4A
charging time (at 20V / 2 Ah): 60 min
compatible with all batteries from PARKSIDE X 20V team series tools
cord length: 5.9′
3-year limited warranty

PARKSIDE disc sander »PTSG 140 C2«, 140 watts
Power: 140 watts
Speed: max. 3600 min-¹
For the precise processing of soft and hard wood.
Ideal for clean edges, curves or mitres in all angles

PARKSIDE disc sander »PTSG 140 C2« with Velcro fastening
characteristics
For precise processing of soft and hard wood
Ideal for clean edges, curves or mitres at all angles
Low-vibration, quiet motor run with continuously adjustable grinding speed
Sanding pad with Velcro fastening
Infinitely angled grinding table
Stop that can be moved in parallel with a freely adjustable angle
Vertical or horizontal device setup (can be fixed with the included screw clamp)
Connection for external dust extraction including removable adapter
Accessories included: Set of 6 sandpaper with Velcro (grit 80, 150, 240 – 2 x each), 1 angle stop, 1 screw clamp, 1 adapter incl. Reducer for external dust extraction, 1 Allen key
material
Sanding table: aluminum

Dimensions
Disc sander: approx. 185 x 285 x 156 mm
Sandpaper (6 pieces): approx. Ø 125 mm
Weight
Disc sander: approx. 2365 g
Angle stop: approx. 55 g
Screw clamp: approx. 144 g
Sandpaper (6 pieces): approx. 44 g
Suction adapter, reducer: approx. 50 g

PARKSIDE paint spray system »PFS 400 A1«, 400 watt blower
Power: 400 watts,
capacity: 900 ml

Even application of paint on smooth and structured surfaces . Non-slip soft grip equipment

PARKSIDE paint spray system »PFS 400 A1« with integrated 400 watt blower
characteristics
Even application of paint on smooth and structured surfaces
Suitable for commercially available paints, varnishes and glazes with a viscosity of up to 70 DIN-sec
Volume adjustable spray gun with integrated 400 watt blower
Anti-slip soft grip equipment
2 usable nozzles (Ø 1.8 mm / Ø 2.6 mm)
3 spray patterns that can be set independently of the nozzle: round jet, horizontal and vertical flat jet
Unscrewable 900 ml paint container
Accessories included: 2 nozzles (Ø 1.8 mm and 2.6 mm), 1 viscosity measuring cup, 1 cleaning brush, 1 cleaning needle, 1 filter

Technical specifications
Nominal consumption: 400 watts
Max. Water flow: 800 ml / min
Container volume: 900 ml
Dimensions
Paint spray system: approx. 284 x 296 x 134 mm
Cleaning brush: approx. 190 x 74 mm
Cleaning needle: approx. 100.5 x Ø 21.2 x Ø 0.8 mm
Nozzles: approx. 39.8 x 24.5 mm
Viscosity measuring cup: approx. 127 x Ø 53 x Ø 9 mm
Cable length: approx. 3 m
Weight

approx. 1320 g

PARKSIDE cordless drill / driver set »PABS 20-Li«, with 2 batteries and charger
From our PARKSIDE X 20 V Team series
Battery voltage: approx. 20 V lithium-ion (2 Ah)
Torque: max. 40 Nm
Complete drill / screwdriver set including 2 batteries, 1 charger and extensive accessories

PARKSIDE 2in1 cordless drill »PABS 20-Li« with 2 batteries and accessory set

Complete drill / driver set including 2 batteries, 1 charger and extensive 73-part accessories
Powerful PARKSIDE SPEEDMASTER motor with 2-speed gearbox
Keyless drill chuck made of metal with radial locking
On / off switch with stepless speed control and quick stop
Integrated LED work light
With magnetic bit holder on both sides
Practical belt clip
Ergonomic soft grip
Charged in 60 minutes
3-stage battery status display
60-minute quick charger with automatic charge cut-off
Including carrying case
25 torque levels + 1 drilling level
Drilling diameter: max 30mm in wood, 13 mm in steel
Max. Torque: 40 Nm
Rated idle speed: 1st gear: n0 0-400 min -1 / 2nd gear: n0 0-1400 min -1
2 x 20V (2.0 Ah) Li-ion batteries
Battery compatible with all devices of the PARKSIDE X 20 V Team series

Accessories included: 1 craft knife, 1 carpenter’s pencil (incl. 2 spare leads), 1 tape measure (5 m), 8 socket wrenches, 1 countersink, 1 center punch, 5 wood drills, 14 metal drills, 40 bits, 1 magnetic bit holder

Parkside cordless impact wrench vehicle

PARKSIDE cordless drill »PABS 20-Li D5«, without battery and charger
From our PARKSIDE X 20 V Team series Maximum
torque: 40 Nm
Speed: max. 1400 min-¹

PARKSIDE cordless drill »PABS 20-Li D5«, without battery and charger
Powerful motor with 2-speed gearbox
Keyless drill chuck made of metal with radial locking
On / off switch with stepless speed control and quick stop
Integrated LED work light
With magnetic bit holder on both sides
Practical belt clip
Ergonomic soft grip
Including carrying case
Battery compatible with all devices of the PARKSIDE X 20 V Team series

Accessories included: Box with 17-piece drill and screw set: 8 HSS drills (2 • 2.5 • 3 • 4 • 5 • 6 • 8 • 10 mm) / 8 screw bits 50 mm (PH1 • PH2 • PH3 • PZ1 • PZ2 • PZ3 • SL5 • SL6) / 1 magnetic bit holder

PARKSIDE drill and chisel hammer »PBH 1050 C3«, 1050 watt, pneumatic hammer mechanism
Power: 1,050 watts Impact
strength: 3.0 joules Impact
rate: 0-5,300 rpm

characteristics
For powerful processing of concrete, stone, metal or wood
Pneumatic hammer mechanism with high impact force
Central selector switch for all functions:
Drilling – without impact
Hammer drilling – with the hammer mechanism switched on
Chiselling – activated hammer mechanism with rotation stop
Setting for chisel alignment (stepless)
Adjusting wheel for speed limitation
Keyless chuck with mounting according to the SDS-Plus system
Attachable keyless chuck for round shank drills
Anti-slip soft grip equipment
Additional handle can be rotated 360 °
Including carrying case
Mains connection indicator light
Included accessories: 1 pointed chisel (250 mm), 1 flat chisel (250 mm), 3 drills (Ø 6/8/10 mm x 150 mm), 1 depth stop, 1 keyless chuck for round shank drills, 50 g special grease for drill bit holder

Technical specifications
With AC motor, copper winding
Rated consumption: 1,050 watts
Impact strength: 3.0 joules
Beat rate: 0-5,300 rpm
Idle speed: n0 0-980 rpm
Max. Drilling diameter: 26 mm in concrete and stone / 13 mm in metal / 32 mm in wood
Dimensions
Hammer: approx. 393 x 213 x 102 mm
Additional handle: approx. 94 x 202 x 70 mm
Keyless drill chuck: approx. 42.4 x 111 mm
Set of 3 bits: approx. 10 x 150 mm
Pointed chisel: approx. 14 x 250 mm
Flat chisel: approx. 14 x 250 mm
Depth stop: approx. L 210 mm
Cable length: approx. 4 m
Weight

approx. 3.6 kg